When protecting your home from a wildfire, one effective measure is installing Wildfire Defense Mesh on vulnerable areas such as decks. This mesh acts as a barrier against dangerous flying embers and radiant heat, which are the primary causes of deck ignitions during wildfires.
Tip: Before you begin enclosing your deck with WDM, it is critical to completely clean out underneath your deck so it’s free and clear of debris!
Measuring your Deck
Wildfire Defense Mesh 98 is available in rolls of a width of 24", 36", 49" and 60" x 50' in length. To best determine your need, you will need to measure the open space of your deck's vertical exposure.
Tip: It is suggested to trench the mesh 4-5" into the ground, so after measuring the deck height, add 4-5"'s to the width.
Applying for your Wildfire Defense Mesh 98
Once you have your measurements to enclose your deck, please proceed to the Berkeley Fire Department Order Page (linked).
Installing Wildfire Defense Mesh 98 on your Deck.
These installation videos will take you through the following steps:
Step 1: Gather Materials and Tools
Step 2: Measure and Cut the Mesh
Step 3: Prepare the Deck Surface
Step 4: Dig a 4” trench
Step 5: Position the Mesh
Step 6: Secure the Mesh
Step 7: Inspect and Maintain
Wildfire Defense Mesh works with a series of installers. Below are installers who operate in the Berkeley area that are familiar with Wildfire Defense Mesh and are insured and bonded.
Contact: Kazoo Shearman
kazoo@shearmanbuilders.com
(510) 501-4403
License # 1091520
Contact: Nigel Siri
nigel@adaptivehomehardening.com
(775) 762-9328
License # 586141
