Built for maximum defense from dangerous embers in a white, corrosion-resistant finish. Screens feature 1/16" openings, a durable frame and pre-made screw holes for clean installation.
Designed primarily for soffit vents, these pre-sized screens can also be used on any vent opening that matches the available dimensions. Each screen features a clean frame with pre-made screw holes for fast, straightforward installation and a neat, finished look—ideal for homeowners who want an easy upgrade without cutting and fitting.
Higher Tensile Woven Wire
Chapter 7A, 706A2
Wildfire Defense Mesh meets the requirements of the CBC, Chapter 7A 706A.2 when tested to ASTM E2886 (Vertically Installed). For best results, remove all combustible materials within 5ft of the mesh application.
Chapter 7A, 706A2.1
Wildfire Defense Mesh meets the requirements of the CBC, Chapter 7A 706A.2 – Off Ridge and Ridge Vents
2021 International Buildland Urban Interface Code (IWUIC)
Compliant with IWUIC Mesh specifications
NFPA 1144: Standard for Reducing Structure Ignition Hazards from Wildland Fire
Compliant with IWUIC Mesh specifications
NFPA Firewise USA, IBHS Wildfire Prepared Home & Fire Authorities
Meets the recommendations when ‘⅛” mesh or finer’ is recommended
Class A Fire Rated Building Product
Surface Burning Characteristics of Building Materials
UL 723 / ASTM E84
30 minute Test
Evaluating the Ability of Exterior Vents to Resist the Entry of Embers and Direct Flame Impingement (Vertical). For best results, remove all combustible materials within 5ft of the mesh application.
ASTM E2886
Flame and Ember Resistance
Evaluating the Ability of Exterior Vents to Resist the Entry of Embers and Direct Flame Impingement (Vertical). For best results, remove all combustible materials within 5ft of the mesh application.
ASTM E2886
Evaluating the Ability of Exterior Vents to Resist the Entry of Embers and Direct Flame Impingement (Vertical). For best results, remove all combustible materials within 5ft of the mesh application.
ASTM E2886
Evaluating the Ability of Exterior Vents to Resist the Entry of Embers and Direct Flame Impingement (Vertical). For best results, remove all combustible materials within 5ft of the mesh application.
ASTM E2886
Flame and Ember Resistance
Evaluating the Ability of Exterior Vents to Resist the Entry of Embers and Direct Flame Impingement (Vertical). For best results, remove all combustible materials within 5ft of the mesh application.
ASTM E2886
Flame and Ember Resistance
Evaluating the Ability of Exterior Vents to Resist the Entry of Embers and Direct Flame Impingement (Vertical). For best results, remove all combustible materials within 5ft of the mesh application.
ASTM E2886
Flame Impingement
Fire Test on Non-Mechanical Fire Dampers Used in Vented Construction (Vertical). For best results, remove all combustible materials within 5ft of the mesh application.
ASTM E2912-17
Flame Impingement
Fire Test on Non-Mechanical Fire Dampers Used in Vented Construction (Vertical). For best results, remove all combustible materials within 5ft of the mesh application.
ASTM E2912-17
Flame Impingement
Fire Test on Non-MechanicalFire Dampers Used in Vented Construction (Vertical). For best results, remove all combustible materials within 5ft of the mesh application.
ASTM E2912-17
Flame Impingement
Fire Test on Non-MechanicalFire Dampers Used in Vented Construction (Vertical). For best results, remove all combustible materials within 5ft of the mesh application.
ASTM E2912-17
Flame Impingement
Fire Test on Non-Mechanical Fire Dampers Used in Vented Construction (Vertical)
ASTM E2912-17
Class A Fire Rated Building Product
Surface Burning Characteristics of Building Materials
UL 723 / ASTM E84
30 minute Test
Evaluating the Ability of Exterior Vents to Resist the Entry of Embers and Direct Flame Impingement (Vertical). For best results, remove all combustible materials within 5ft of the mesh application.
ASTM E2886
Evaluating the Ability of Exterior Vents to Resist the Entry of Embers and Direct Flame Impingement (Vertical). For best results, remove all combustible materials within 5ft of the mesh application.
ASTM E2886
Evaluating the Ability of Exterior Vents to Resist the Entry of Embers and Direct Flame Impingement (Vertical). For best results, remove all combustible materials within 5ft of the mesh application.
ASTM E2886
Flame and Ember Resistance
Evaluating the Ability of Exterior Vents to Resist the Entry of Embers and Direct Flame Impingement (Vertical). For best results, remove all combustible materials within 5ft of the mesh application.
ASTM E2886
Flame Impingement
Fire Test on Non-Mechanical Fire Dampers Used in Vented Construction (Vertical). For best results, remove all combustible materials within 5ft of the mesh application.
ASTM E2912-17
Flame Impingement
Fire Test on Non-Mechanical Fire Dampers Used in Vented Construction (Vertical). For best results, remove all combustible materials within 5ft of the mesh application.
ASTM E2912-17
Flame Impingement
Fire Test on Non-Mechanical Fire Dampers Used in Vented Construction (Vertical). For best results, remove all combustible materials within 5ft of the mesh application.
ASTM E2912-17
Flame Impingement
Fire Test on Non-Mechanical Fire Dampers Used in Vented Construction (Vertical)
ASTM E2912-17
Stainless Steel Woven Mesh Standards
SS Chemical Composition ASTM – A580
Corrosion Test
Stainless Steel Corrosion Resistance
AS/NZS 2331
Bushfire Test & Standards
Aperture Dimensions AS 3959
